PT. MESIN ISUZU INDONESIA

Dalam rangka pengembangan organisasi di perusahaan kami, PT. Isuzu Indonesia mengundang para Alumni dari UGM Jurusan D3 Teknik Mesin untuk bergabung dengan team kami

Adapun persyaratannya antara lain:
• Umur maksimal 25 tahun
• IPK Minimal 2,50

Lamaran dialamatkan ke :
PT. MESIN ISUZU INDONESIA
Jl. Kaliabang No. 1 Pondok Ungu, Kel. Medan Satria, Bekasi 17013 (Cap Pos)

Atau melalui email : rudi.nuryanta@isuzu.astra.co.id
Cc: sap2_mesin@yahoo.co.id

Lamaran paling lambat diterima tanggal 10 Juli 2009
CP: Djumadi : 0813 8109 7147

PT. PRATAMA ABADI INDUSTRI

We are an established sport shoes manufacturing company, located in Serpong (Tangerang) is seeking highly motivated candidates to fill the following position

Value Stream Coordinator (VSC)

Responsibilities:
Supervising, planning, and controlling production lean process.
General requirement:
Min. D3 Engineering/Management with GPA (min 2.75)
High motivation
Creative and innovative
Strong analytical thinking
Good communication skill
Good leadership skill
Min. passive in English
Willing to work in factory setting
Can work in under pressure situation

If you would like to take the challenges:
Please send your application letter with CV, transcripts, recent photograph, and other related document with the position code at left of the envelope or at email subject not later than July 10th to:

HRM. PT. Pratama Abadi Industri
Jl. Raya Serpong, Km 7.Pakulonan, Serpong
Tangerang – Banten
021-5396140 Ext. 172
Or mail to:
hrd.gustri@pratama.net
recruitment@pratama.net
cc: sap2_mesin@yahoo.co.id

PREMIER OIL

“Premier Oil is growing……..continue the journey with us”

Premier is a leading FTSE 250 independent exploration and production company with gas and oil interests in the Middle East, Pakistan, the North Sea and West Africa. Within Asia we have offices and operations across Indonesia, Vietnam and Singapore.

After record operating results in 2008, the acquisition of “Oilexco North Sea Ltd” with extensive North Sea interests, long term gas supply contracts and circa US$800M of development funding in place, Premier's future outlook is very strong. For over a decade we have been acquiring new blocks, drilling wells, and delivering profitable oil and gas developments.

Operationally, Gajah Baru is currently in the final stages of the award process. This 7500 ton integrated platform will be bridge linked to a drilling platform, with product exported via a new 3.5 km pipeline to an existing trunk line. It will also act as the hub for developing several other fields over the next decade. In addition, ongoing developments in North Sumatra Block A will see three new gas fields coming on stream during 2011. Premier is also preparing for future development activities in the area as larger reserves have been identified. In Vietnam, construction work on a wellhead platform continues in Vung Tau, and discussions with potential FPSO providers are moving towards a final agreement.

Premier Oil now seeks experienced staff with strong upstream experience, good English skills and relevant qualifications. We welcome applications from Indonesian and Vietnamese staff working overseas. A market leading package is on offer to successful candidates commensurate with experience and qualifications. Please provide a comprehensive CV (English).
Mechanical Technician (Test in Yogyakarta)
(Yogyakarta - Yogyakarta)

Requirements:

* Candidate must possess at least a Diploma or Bachelor's Degree in Engineering (Mechanical) or equivalent.
* Majoring in Petroleum, Electrical, Mechanical, Instrumental or Chemical
* Maximum 2 years experience, Fresh Graduates are welcome to apply
* Minimum IPK 2.75
* Required language(s): English.
* Applicants should be Indonesian citizens or hold relevant residence status.
* Fresh graduates/Entry level applicants are encouraged to apply.
* Full-Time positions available.


Production Technician (Test in Yogyakarta)
(Yogyakarta - Yogyakarta)

Requirements:

* Candidate must possess at least a Diploma or Bachelor's Degree in Engineering (Mechanical) or equivalent.
* Majoring in Petroleum, Electrical, Mechanical, Instrumental or Chemical
* Maximum 2 years experience, Fresh Graduates are welcome to apply
* Minimum IPK 2.75
* Required language(s): English.
* Applicants should be Indonesian citizens or hold relevant residence status.
* Fresh graduates/Entry level applicants are encouraged to apply.
* Full-Time positions available.

Instrument Technician (Yogyakarta)
(Yogyakarta - Yogyakarta)

Requirements:

* Candidate must possess at least a Diploma or Bachelor's Degree in Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
* Majoring in Petroleum, Electrical, Mechanical, Instrumental or Chemical
* Maximum 2 years experience, Fresh Graduates are welcome to apply
* Minimum IPK 2.75
* Required language(s): English.
* Applicants should be Indonesian citizens or hold relevant residence status.
* Fresh graduates/Entry level applicants are encouraged to apply.
* Full-Time positions available.

Closing Date:22-7-2009
For those eligible candidates the test will be held in Yogyakarta on July 24-25

for more information see at http://202.53.226.102/_profile/previewProfile.asp?advertiser_id=10912

or www.premier-oil.com

GAMA MULTI USAHA MANDIRI

Dibutuhkan Mekanik Otomotif (ME)

syarat:
-Laki-laki, usia maksimal 40 tahun
-Pendidikan Min. SMK Otomotif
-Berpengalaman di bidang otomotif min. 2 tahun
-Memiliki SIM A
-Melampirkan sertifikat otomotif yang dimiliki
Kirimkan Surat Lamaran, CV, Identitas lengkap.
Tuliskan Kode posisi pada pojok kiri atas amplop ke:
HRD Department
PT. GAMA MULTI USAHA MANDIRI
BULAKSUMUR H-5 YOGYAKARTA
Paling lambat tanggal 5 Juli 2009

PT. TEAM METAL INDONESIA BATAM

PT. TEAM METAL INDONESIA-BATAM
Membutuhkan beberapa tenaga kerja baru dengan persyaratan :
1. Pria, Lulusan D3 Teknik Mesin, IPK 2,55
2. Belum Menikah, usia maks. 26 th
3. Tinggi badan min. 160cm
4. Bisa berbahasa Inggris
5. Bersedia menjalanklan kontrak minimal 2 (dua) tahun di Batam

Fasilitas dari Perusahaan
- Tiket Pesawat untuk keberangkatan dan kepulangan saat kontrak berakhir
-Selama 3(tiga) bulan pertama, perusahaan menyediakan tempat tinggal

Surat lamaran ditujukan kepada:
HRD PT. TEAM METAL INDONESIA - BATAM
dilampiri: CV, fotokopi ijazah, fotokopi KTP, 2 lembar pas foto 4x6 cm dan persayaratan lainnya bisa menyusul

Pendaftaran mulai tanggal 30 Juni sampai dengan 11 Juli 2009
Pelaksanaan Test direncanakan bulan Juli 2009 bertempat di BKK-BLPT Yogyakarta

Informasi lengkap hubungi BKK BLPT,
Telp./Fax.: 0274 555325
Contact person Lestari Putro HP. 08179432990
setiap jam kerja: 08.00 s/d 14.00 WIB


mau kerjasama dengan saya klik aja http://www.kerjainputdata.net?id=massapto

PT. Sari Husada

Perushaan Multinasional yang memproduksi berbagai macam produk minuman dan makanan bergizi standard internasional membutuhkan tenaga yang handal dan berkualitas untuk memperkuat jajaran produksi sebagai:

1. Utility Technician (Code: UTT)
2. Boiler Operator (Code: BOP)



Kualifikasi sbb:
- Pria, Maks. 25 tahun
- Pendidikan Min. D3 Listrik Arus kuat (point.1), Min D3 Teknik Elektro/Mesin
- Berpengalaman dibidang yang sama min. 1 tahun
- Memiliki kemampuan maintenance atau mengoperasikan mesin utility (boiler, genset, compressor, pompa, listrik)
- Memiliki pengetahuan safety
- Menguasai aplikasi komputer min. MS Office
- Menguasai Bahasa Inggris
- Area penempatan : Yogyakarta

Kirimkan Surat lamaran, CV, dan pas Foto terbaru ke:
PO BOX 37 Yogyakarta 55002
paling lambat tanggal 27 Juni 2009
Cantumkan Kode Posisi disudut kanan atas amplop

Hanya kandidat yang memenuhi kualifikasi yang akan diproses


Ingin pekerjaan ringan namun menghasilkan?
klik aja http://www.kerjainputdata.net?id=massapto

PT. UNINDO

A join Venture between REVA T&D and PT. PLN

Open Position:

UTR Packinglist and Shipment (1 position)

requirement:
- Graduate in Mechanical Engineering (D3, GPA>3,01)
- Fresh Graduate
- Proficiency in English both verbal and written, Computer literate (MS Office)
- High Integrity, fast learning, good analytical skill
- Able to work under pressure and excellence team player
- Knows how to operate CAD



We are inviting qualified candidates to send your CV to :
farida.juniarti@areva-td.com

PT. KELLOG SRIWIJAYA

Lulusan D3 Teknik Mesin untuk bekerja di perusahaan alat berat, dengan syarat :
-lulusan D3 Teknik Mesin UGM
-IPK minimal 2,75
- Mau bekerja keras, ulet, menyukai tantangan
-Bersedia bekerja langsung di lapangan
-Loyalitas tinggi



Bagi yang serius ingin kerja dan memenuhi kualifikasi tersebut,
silakan menghubungi Pak Karwi di 08122706286
atau datang langsung ke Lab. Pneumatik Kampus D3 Mesin Grafika

PT. UNITED TRACTORS PANDU ENGINEERING

Salah satu anak perusahaan PT Astra Internasional dalam kelompok PT United Tractors, Tbk yang begerak di bidang industri manufaktur alat-alat berat seperti; dump truck, heavy transportation equipment, original equipment and attachments dan mining support, yang berlokasi di Cikarang membutuhkan beberapa staff untuk posisi:

1.Management Trainee (kode: MT)
-Fresh Graduate, lulus dari S1 Jurusan Teknik Industri, Teknik Elektro, Teknik Sistem Perkapalan, Teknik Perkapalan, Ekonomi akuntansi/Manajemen
-Untuk lulusan Teknik-menguasai AutoCad (dan Pro E lebih baik)

2. Technician (kode: TECH)
-Fresh graduate/ berpengalaman, lulus D3 jurusan Teknik Mesin, dengan spesifikasi Teknik Mesin Manufaktur, Pembuatan Peralatan & Perkakas Produksi atau Design
-Menguasai Auto Cad (dan Pro E lebih baik)

3. Part Analyst / Part Sales Officer ( kode: PA/PSO)
-Fresh Graduate/Berpengalaman, Lulus D3 Teknik Mesin

4. Business Consultan (kode: BC-P / BC-U / BC-F)
-BC Part: Fresh Graduate/ berpengalaman lulus D3 Teknik (umum), S1 Teknik (umum)
-BC Unit: Fresh Graduate/ berpengalaman, lulus dari S1 jurusan teknik (umum)
-BC Forklift: Lulus D3 Tekni (umum) atau S1 Teknik (umum), berpengalaman dibidang forklift minimal 3 tahun (wajib)

5. Finance & Accounting Manager (kode: FAM)
-Lulus dari S1 Ekonomi Akuntansi
-Berpengalaman dibidang Finance & Accounting minimal 3 tahun (wajib)
-Menguasai dengan baik masalah budgeting, cash flow, perpajakan, laporan keuangan, serta peraturan di bidang keuangandan perbankan
-Mempunyai networking yang luas dengan institusi finansial dan perbankan



Persyaratan Umum:
1. Laki-laki/Perempuan
2. IPK minimal 2,8
3. Usia maksimal fresh graduate: 23th (D3) dan 26th (S1)
4. Usia maksimal berpengalaman: 32th
5. Sanggup bekerja kerwas dengan supervisi minimal
6. Mempunyai motivasi, komitmen dan determinasi kerja yang tinggi
7. Mempunyai kemampuan bekerjasama dan komunikasi yang baik
8. Bersedia ditempatkan di seluruh Indoneisa

Tuliskan kode jabatan yang dilamarpada sudut kiri atas amplop

informasi lebih lanjut hubungi:

PT. UNITED TRACTORS PANDU ENGINEERING
Human Resource Department
Jl. Jababeka XI Blok H 30 - 40
Kawasan Industri Jababeka, Cikarang, Bekasi
Telp. 021-8935016 ext1214 / Fax. 021 8936353
email : estibh@unitedtractors.com
website : www.patria.com

PT. Royal Standard

A national manufacturing company located in Jakarta & Karawang, offer paper stationary to corporate, banking, industy and lokal government.
The company is looking for:

Management Trainee-Production (MT)


Requirements:
-Male, Single, age max 28 years old
-D3 Industrial /Mechanical/Electrical Engineering
-Min 1 year experience in relted position, fresh graduate are welcome
-Computer Literate
-Good personality

Submit your application, CV and recent photograph to:
HRD DEPARTMENT
PT. ROYAL STANDARD
JL. KAPUK KAMAL No. 45 JAKARTA UTARA 14470

or email

hrd@royalstandard.co.id

please write the code of position in left corner the envelope or subject email

PT. BUKAKA TEKNIK UTAMA

Sehubungan dengan program pengembangan perusahaan PT. Bukaka Teknik Utama yang bergerak di bidang Konstruksi dan manufaktur, kami membutuhkan alumni Fakultas UGM dengan persyaratan sbb:
1. Lulus D3 Teknik Mesin pada tahun 2007, 2008, atau 2009
2. IPK Min. 2,8 Skala 4
3. Memiliki pengetahuan yang cukup di bidang PPIC (Production, Planning, Inventory & Control)
4. Memiliki pengetahuan yang cukup mengenai material besi dan Baja
5. Memiliki jiwa leadership, analytical thinking, problem solving dan decision making yang baik.
6. Mampu bekerjasama baik sebagai pemimpin tim maupun anggota tim
7. Menyukai pekerjaan lapangan dan mampu menyesuaikan diri dalam lingkungan kerja secara cepat

Berkas lamaran (Surat lamaran, CV, Pas Foto, Transkrip Nilai dan Ijazah) agar dikirimkan ke Bagian Kemahasiswaan Fakultas Teknik UGM paling lambat tanggal 23 Juni 2009

http://www.kerjainputdata.net?id=massapto

BORDA - SEA

Kami adalah organisasi internasional nirlaba (LSM). Bersama dengan beberapa partner LSM lokal, kami memfasilitasi implementasi aktivitas di bidang sistem pengolahan limbah terdesentralisasi dan sanitasi masyarakat di area pedesaan maupun kota miskin di Indonesia.
Silakan kunjungi www.borda-sea.org untuk informasi lebih lanjut.

Sebagai bagian dari kegiatan R&D, kami mengundang mahasiswa Indonesia untuk bergabung dalam program penelitian dan monitoring kami.


kualifikasi:
Mahasiswa D3/S1 program studi Teknik Lingkungan, Teknik Mesin, atau Teknik Elektro.
-mampu berkomunikasi dalam bahasa Inggris dengan baik
-Mempunyai kemampuan analisis yang baik dan mampu belajar dengan cepat
-Dapat bekerja sebagai tim
-Mau bekerja di lapangan proyek kami di area Yogyakarta
-Mahasiswa tingkat akhir lebih diutamakan
-mahasiswa dengan pengalaman dan pengetahuan tentang PLC dan wiring dianjurkan untuk mendaftar.

Silahkan kirim CV Anda secepatnya dalam bahasa Inggris
ke: borda@idola.net.id
dengan subject "Application for RD" paling lambat tanggal 23 Juni 2009

TEAC ELECTRONICS INDONESIA

We Are leading Japanese company, having large manufacturing presence in the computer periperals industry and as TEAC Worldwide Group's first plant in Indonesia, looking for some professionals to be located in Batam.

ENGINEERING (ENG)

Reporting to Engineering manager, you will be responsible for Customer Quality Approach and support production for analysis. You are requested to have capabilities to handle troubleshooting and to make product improvement

Requirements:
-D3/S1 Degree in Mechanical Engineering
-Familiar with moulding activities
-Fast learner
-Able to work in a team, under a fast-paced environment
-Fresh graduated with minimum GPA 3,00

You must be weel conversation in English, computer literate, highly motivated, and willing to reside in Batam, Please send your application letter (with position code) & CV with recent contact telephone number before 17 June, 2009 to :

PT. TAEC Electronics Indonesia
Jl. Beringin Lot 10, Batamindo Industrial Park
Muk Kuning, Batam

or via email to: recruit@teac.co.id
cc: sap2_mesin@yahoo.co.id

PENGUMUMAN PESERTA TEST KAYABA

PENGUMUMAN
DAFTAR NAMA PELAMAR YANG BERHAK MENGIKUTI PROSES SELEKSI TANGGAL 18 JUNI 2009
DARI DIPLOMA TEKNIK MESIN DAN TEKNIK ELEKTRO UNIVERSITAS GADJAH MADA YOGYAKARTA
NO NAMA TEMPAT, TGL LAHIR ALUMNI JURUSAN IPK
1 BAYU ASMORO A.S. Klaten, 27 Juni 1987 ISTA Otomotif 3,09
2 MARDIYANTO Klaten, 16 Februari 1986 ISTA Mesin 3,21
3 BANGUN CAHYADI Brebes, 17 November 1987 ISTA Otomotif 3,23
4 IFAN SHON HAJI Banjarnegara, 28 Juni 1987 ISTA Otomotif 3,00
5 NANA ARIANTO Boyolali, 3 September 1986 ISTA Mesin 3,03
6 RACHMAD R. Yogyakarta, 14 Desember 1985 ISTA Elektro 3,18
7 RASYID RASIDI Klaten, 29 November 1987 Polines Mesin 2,88
8 KUKUH AGUS S. Temanggung, 5 September 1985 Polines Mesin 2,89
9 IBNU ISMAIL Kulon Progo, 5 April 1985 UGM Elektro 2,95
10 PUTRI PULUNGSARI Yogyakarta, 11 April 1987 UGM Elektro 3,32
11 ABDI MUSLIM Palembang, 28 Maret 1987 UGM Elektro 3,14
12 DEDI IRAWAN Lampung, 9 September 1985 UGM Elektro 2,81
13 AKHMAD MA'ARIF Surakarta, 9 Februari 1987 UGM Elektro 3,58
14 HERI WIDYATMANTO Kulon Progo 10 September 1987 UGM Elektro 3,00
15 SUJANG SUBEKTI Bantul, 27 September 1984 UGM Elektro 2,84
16 DIMAS PRASETYO Palembang, 5 Juli 1986 UGM Elektro 2,75
17 WAHID A.R Jakarta, 21 Mei 1987 UGM Elektro 2,82
18 HARIS AMRULLAH Kebumen, 28 Mei 1987 UGM Elektro 3,17
19 SUPRAPTO Sukoharjo, 9 September 1985 UGM Elektro 3,06
20 FAHMIZAL Bengkulu, 23 Juli 1988 UGM Elektro 3,39
21 ARGO PRAMUDITO Magelang, 7 September 1986 UGM Mesin 3,41
22 ARIS NURHIDAYAT Boyolali, 22 Desember 1986 UGM Mesin 3,21
23 CIKRISNA A.W. Madiun, 8 Juli 1987 UGM Mesin 3,07
24 WAHYU SUPRIYADI Lampung, 15 Mei 1985 UGM Mesin 3,02
25 SIGIT RIAGUNG Bantul, 30 April 1987 UGM Mesin 3,11
26 A'ANG Yogyakarta, 22 Juli 1987 UGM Mesin 3,25
27 YUNANTO A. P. Bantul, 12 Juni 1986 UGM Mesin 3,04
28 HENDRI SETIAWAN Pekalongan, 22 April 1987 UGM Mesin 2,96
29 DWI SULISTYO Sragen, 26 Juli 1984 UGM Mesin 3,2
30 MORA ILHAM Batam, 27 September 1986 UGM Mesin 2,90
31 VIERA DANNY I. Kotabaru, 26 Agustus 1986 UGM Otomotif 2,92
32 ANDRI JATMIKO Kebumen, 22 April 1987 UNY Elektro 2,75
33 MUHAMMAD AZHARI H. Sleman, 25 Juni 1986 UNY Mesin 3,15
34 EKO AGUS P. Kebumen, 15 Agustus 1986 UNY Mesin 3,25
35 IVAN A Kebumen, 5 Februari 1986 UNY Otomotif 3,10
36 JONI SETIA BUDI Kebumen, 25 Juni 2009 UNY Otomotif 2,88
37 SEPTIAN AKBAR Cirebon, 29 Agustus 1987 UNY Otomotif 2,99
38 FATHUROHMAN Kebumen, 3 Juni 1987 UGM Elektro 2,92
39 ANGGAH W. Jakarta, 16 September 1987 UGM Elektro 3,02
40 ANDHI BIYANA Blora, 23 Agustus 1986 UGM Elektro 3,23
41 SONNY BENS SAPUTRA Balikpapan, 10 Maret 1987 UGM Mesin 2,95
42 BAMBANG WAHYU Jakarta, 25 Mei 1988 UGM Mesin 3,04
43 HENDRIX PURWO Purworejo, 01 September 1987 UGM Mesin 3,33
44 YANUAR BONI SUNTOSO Cilacap, 14 Januari 1987 ISTA Mesin 3,20
45 SONY FIBRIANTO Purwonegoro, 18 Februari 1985 UNY Mesin 3,05
46 M. HERY SAPUTRA Jakarta, 25 April 1987 UNY Mesin 3,19
47 GALIH TRIEKA YANWAR Cilacap, 29 Januari 1985 UNY Mesin 3,23

CATATAN
Peserta seleksi yang namanya tercantum dalam daftar diatas diharap mengikuti seleksi pada :
Hari, tanggal : KAMIS, 18 JUNI 2009
Jam : 08.00 WIB - Selesai
Tempat : Ruang 218 Lantai 2
Program D3 Teknik Mesin UGM
Jl. Yacaranda Sekip Unit IV Yogyakarta

Harap Membawa : Surat Lamaran, Daftar Riwayat hidup, Fotocopy Ijazah, Transkrip Nilai, Pas Foto ukuran 4x6 dan copy KTP yang masih berlaku.

PT. Fajar Baru Tehnik Makmur

Dibutuhkan segera
1. Supervisor Machinery & Construction
-Max. 30 tahun, Min. D3 Teknik Mesin
-Manajerial Mesin Industri
-Faham teknik bubut-milling-frais-las, dll
-Faham gambar design mesin industri
-pengalaman ppic min 2 tahun

2.Tehnisi listrik
-max. 29 tahun, min STM/SMK
- Spesialisasi arus lemah (PLC, Mekatronika)
-Pengalaman min. 1 tahun (PLC)

3. Drafter/Drawing
-Max.28 tahun, min. D3 Teknik Mesin
-Spesialisasi Autocad 2D & 3D mesin industri
-Faham teknik bubut-milling-frais-las, dll
-Pengalaman min 1 tahun (drawing/drafter)

4. Konstruksi
-Max. 30 tahun, min. STM/SMK
-Mahir & menguasai teknik las ARGON
-Sanggup bekerja sendiri maupun team
-Faham & mengerti teknik welder
-Pengalaman min. 1 tahun (welder/las)

5. Driver
-Max. 35 tahun, min SMA
-Min. SIM B1
-Disiplin, jujur & bertanggungjawab
-siap untuk dinas luar kota & mengerti wilayah Pantura Jakarta
-Pengalaman min.1 tahun


Kirimkan lamaran CV lengkap ke:
PT. FAJAR BARU TEHNIK MAKMUR
Kawasan Industri Candi, Gatot Subroto Blok 27/5 Semarang

UNITED TRACTORS

PT. United Tractors Tbk, sebuah perusahaan distributor alat-alat berat terkemuka di Indonesia membutuhkan kandidat berkualitas dan memiliki motivasi tinggi untuk bergabung dalam program magang terencana sebagai:

1. Technical Instructor
2. Technical Officer
3. Safety Officer


Kualifikasi:
-Pria, lajang
-Lulusan Politeknik/D3 (usia maks. 25 tahun) dari Universitas terkemuka, Jurusan T. Mesin, T. Elektro, T. Otomotif, dan Hiperkes dan Keselamatan Kerja
-IPK Min. 2,75
-Tinggi Badan minimal 165 cm, Tidak berkacamata
-Bahasa Inggris aktif, Lisan dan tulisan
-Kreatif, Komunikatif
-Memiliki Kepribadian yang dinamis
-Mudah bekerjasama
-Dapat melakukan presentasi dengan baik
-Bersedia ditempatkan di seluruh wilayah Indonesia
-Lamaran dan CV dikirim ke Bag. Umum dan Administrasi Diploma Teknik Elektro UGM paling lambat tanggal 18 Juni 2009

Kandidat yang memenuhi kriteria akan kami undang via SMS untuk mengikuti proses selanjutnya.

Untuk Informasi lebih lanjut dapat menghubungi:
Telp: 021-4605959/79 ext. 1350 (Anwar/ Dita)

PT. GAPURA ANGKASA

Kami merupakan perusahaan yang bergerak di bidang jasa groundhandling dengan 23 cabang yang tersebar di seluruh Indonesia, membuka kesempatan bagi Anda untuk bergabung di perusahaan kami dengan tawaran fasilitas kerja yang menarik

Mekani Ground Support Equipments (GSE)

Persyaratan:
1. Pria, usia mak. 26 tahun
2. pendidikan min D3 Otomotif Alat Berat / Elektronika (Mekatronika)
3. mampu mengoperasikan MS Office (Word, Excell), Project, Visio, dan Autocad
4. mampu memahami Bahasa Inggris Bail lisan maupun tulisan
5. Sehat Jasmani dan rohani (tinggi dan berat badan proporsional, tidak buta warna)
6. Bersedia ditempatkan di wilayah kerja PT Gapura Angkasa
7. Bagi yang belum memiliki ijazah dikarenakan masih dalam proses kelulusan dan telah menyelesaikan seluruh kegiatan perkuliahan, mohon agar menyertakan Surat Keterangan Lulus



Surat lamaran, CV lengkap, pas Foto terbaru dan fotokopi legalisir ijazah terakhir dapat di Bagian Kemahasiswaan Diploma Teknik Mesin UGM paling lambat tanggal 15 Juni 2009.

Surat lamaran ditujukan kepada :
PT. Gapura Angkasa
Gedung JAMKRINDO Lt. 3-3A
Jl. Angkasa Blok B9 Kav. 6
Kotabaru bandar Kemayoran - Jakarta 10720

Untuk Informasi lebih lanjut dapat menghubungi Ibu Oki atau Bpk. Zein di 021 6545410

PT. MTU Indonesia

PT. MTU Indonesia is the Indonesia arm of MTU Asia Pte Ltd. MTU Asia Pte Ltd is a direct subsidiary of MTU Friedrichshafen GmbH – one of the leading worldwide manufacturers of large diesel engines and complete drive systems. In partnership with Detroit Diesel, we are one of the core leading brands of Tognum GmbH.

Our presence in Indonesia is fuelled by demand for our products and services – one of the most modern and wide-ranging in the sector.

In addition to diesel engines and drive systems, we also supply heavy land, industrial applications and decentralized power generation plants - and cover diesel engines from 20kW to 9000kW and gas turbines under the brand of MTU, Detroit Diesel, and Mercedes Benz OM.

We are currently expanding our presence and looking for highly talented person (fresh graduate also welcome) to join

MANAGEMENT/TECHNICAL
TRAINEE PROGRAM
(M/T T- MTU)

Qualifications:
1. S1 or D3 Degree in Mechanical, Mechatronic or Electronic with minimum GPA 3.00 of 4.00 Scale.
2. Have good health condition
3. An energetic, enthusiastic, and committed person with high integrity and good interpersonal skills
4. Keen to learn and work with diesel engines and enjoy challenges
5. Eager to attend all training programs conducted in class; workshop and fields (on the job training) located throughout Indonesia regions.
6. Sufficient spoken & written English
7. Passed selection test (interview; written test; psycho test and medical test).

Selected candidates will undergo a one year comprehensive training through all departments and operational activities within MTU Indonesia organization.

Upon completing this program, successful candidates will be appointed as an employee in the Service/Sales/Parts Department within PT. MTU Indonesia organization.

Please send your application letter indicating your interest and the reason why you are applying this position, together with the copy of your academic certificate, transcript and recent photograph to

PT. MTU Indonesia
Cilandak Commercial Estate, Building # 109
Jl. Cilandak KKO, Jakarta 12560
Attn. HR & Admin Manager
Or via e-mail : waluyanto@mtu-online.co.id (maximum 200 KB)
Cc : sap2_mesin@yahoo.co.id

This advertisement will be closed on 30 June 2009 and only those who meet qualifications will be called for selection process.

PT. COCA-COLA BOTTLING INDONESIA-JAKARTA

PT. Coca-cola Bottling Indonesia - Jakarta Plant, membutuhkan banyak tenaga muda yang memiliki motivasi dan semangat tinggi untuk menempati posisi-posisi sebagai berikut:
1. Operator Produksi (OP)
-Mengoperasikan Mesin sesuai prosedur serta target yang ditentukan baik kualitas maupun kuantitas.
-Melaksanakan GMP diarea kerja
-Mengimplementasikan kesehatan dan keselamat kerja di area kerja

2. QA Analyst (QA)
-Memastikan kualitas produk dan semua parameter sesuai dengan standars yang ditetapkan The Coca-cola Company
-Melakukan controling dan monitoring selama proses cleaning dan sanitizing
-Mengimplementasikan kesehatan dan keselamatan kerja di area kerja

Kualifikasi umum:
Pendidikan
-Posisi (OP) minimal D3 Teknik Mekanik/Elektro/Kimia (min.IPK 2,75)
-Posisi (QA) minimal SMK jurusan Kimia (nilai rata-rata 7) atau D3 Teknik Kimia/Teknologi Pangan (min. IPK 2,75)
Mempunyai kemampuan komunikasi hubungan interpersonal yang baik dan mampu bekerjasana dalam team.
Tanggungjawab, jujur, disiplin, teliti dan mau bekerja keras
Mampu mengoperasikan komputer (MS Word, Excell)
Menguasai bahasa Inggris suatu nilai tambah
Bersedia bekerja dalam sistem shift (3 shift)
Sehat jasmani dan rohani
Jika Anda memiliki kualifikasi tersebut diatas, kirimkan lamaran lengkap (Scan Document):
-Curiculum Vitae/Daftar Riwayat Hidup
-Ijazah terakhir
-KTP & SKKB terbaru
-Foto berwarna 4x6 terbaru
-Surat Keterangan Sehat dari Dokter
-Sertifikat/Surat pengalaman Kerja (jika ada)

Lamaran lengkap dengan mencantumkan kode posisi disebelah kiri atas amplop ditujukan ke: HR Department
PT. Coca-cola Bottling Indonesia-Jakarta Plant
Jl. Teuku Umar Km 46. Cikarang Barat, Bekasi 17520

atau email
ke : masyfufah@sea.ccamatil.com atau dewi.sulistyowati@seaccamatil.com
cc : sap2_mesin@yahoo.co.id
subjek: OPERATOR PRODUKSI

Paling lambat tanggal 24 juli 2009
Hanya kandidat yang memenuhi qualifikasi yang akan kami proses

TELEKOMUNIKASI

We are a fast growing telecommunication services company inviting professionals to fulfill below challenging positions:
Project Administration

GENERAL REQUIREMENTS:
1. Have at least 1 year experience in the same field.
2.Min. D3 Engineering
3. Auto-Cad Skill and Administration skill
4. Fast learner
5.Will be located in Jabodetabek

If you are interested in career opportunity with us, please submit your CV/resume and recent photograph, not later than June 19, 2009 to:
HRD Department:
Kompleks DʼBest Fatmawati
Jl. Fatmawati Raya No.15 - Blok C 12
Jakarta Selatan 12420
Or email to:
career@mas-indo.com

TVS MOTOR

We are the TVS MOTOR COMPANY located in KARAWANG, part of the TVS Group is the seventh largest motorcycle company in the world, with a turn over of USD 740 million. We are now in Indonesia where we see a fast potential for growth motorcycle market in the world.
To fulfill our ambition to become the third largest motorcycle in Indonesia, we are looking for dynamic and highly motivated individuals to strengthen our management team for the future. If you’re ready for challenge and want to join a company with
sports culture, you can apply for career opportunity as:

Development Engineer (Code : Dev.Eng)
QUALIFICATIONS :
1. D3 / S1 Engineer.
2. Age Below 32 years.
3. Min 2 - 5 years working experience in same position.
4. Good interpersonal skill,hardworking & high initiative.
RESPONSIBILITIES :
1. Part development (Automotive)
2. Global sources for parts from china,Malaysia and thailand.
3. Monitoring development of components in vendors.
4. Maintain development schedule in vendors to meet trial schedule.

Interested Candidates are requested to send their detailed resume/CV to :
“hrdtvs@yahoo.com”or “talent@tvsmotor.co.id”

Note : Please
send your current and expected salary, academic qualification, past working
experiences and write reason for leaving previous employment.
Not later than 3 weeks after this advertisement
All attachment Not more than 100 KB in MS. Word Format.
Please put POSITION CODE in Email Subject
Only short listed candidates will be contacted

HM Sampoerna Tbk

PT Hanjaya Mandala SAMPOERNA Tbk., one of the leading tobacco manufacturing companies in Indonesia, produces brands such as Dji Sam Soe, A Mild, and Sampoerna Hijau, and is an affiliate of Philip Morris International, one of the leading international tobacco company.

Due to business growth, upcoming projects and other business objectives, we are looking for talented people who possess a passionate and enterprising spirit to grow with us in forming the future of our business.

Current opportunities include:
PRODUCTION TECHNICIAN
(Karawang & Bekasi - West Java based)
To operate production machineries and perform light troubleshooting in order to produce required quality product consistent with the production specifications and plan.
Qualifications:
· SMK average point in NEM min 7.00 or Diploma Degree (D3/D4) with minimum GPA: 2.7

Electrical/Industry Instrumentation;

Mechanical/Electrical/Mechatronic Engineering (Sub Concentration: Energy Conversion, Electricity, Electrical, Manufacture, or Industrial Mechanical);
· Fresh graduate or will be graduate in this year and experience are welcome;
· Willing to work in Shift time;
· Have not joined the written test for this position within 1 year starting from the date of the last test taken;
· Having good level of computer literacy is an advantage;
· Willing to be located in Karawang and Bekasi.
For those who are interested and possess the above
required qualifications, please come to:
Date : Monday, June 22nd 2009
Time : 09:00-10.00 (for registration)
Venue : Room 218, 2nd floor D3 Engineering Faculty Campus
Gadjah Mada University (UGM)
Jl. Yacaranda, Sekip Unit !V, YGY
Things to bring : Academic transcript, ID card, calculator and pencil 2B.

Written test will be organized at the same time

PT. KAYABA INDONESIA

Dalam Kesempatan ini PT. KAYABA INDONESIA (Astra Component Group) membuka kesempatan seluas mungkin kepada para Alumni untuk bergabung dan mengisi posisi:

1. FOREMAN Produksi
2. FOREMAN PCM (Process Engineering & Maintenance)
3. FOREMAN CPC (Cost Planning Control)

Syarat:

* D3 Jurusan D3 Teknik Mesin & Teknik Elektro
* IPK Minimal 2,75 (skala 4)
* Mau bekerja keras, memiliki kemauan kuat untuk belajar
* Memiliki kemampuan leadership
* Single, Usia Maksimum 25 tahun

Jika anda berminat, silahkan
Hubungi dan daftarkan diri anda ke Bagian Kemahasiswaan Program Diploma Teknik Mesin FT-UGM (Mas Sapto) Jl. Yacaranda Sekip Unit IV Yogyakarta (maaf tidak bisa online)

Pendaftaran ditutup tanggal 11 Juni 2009
Peserta yang memenuhi kualifikasi dan berhak mengikuti seleksi akan kami umumkan dipapan pengumuman kampus D3 Teknik Mesin FT-UGM dan Blog ini tanggal 15 Juni 2009

Pada saat mengikuti seleksi peserta harus membawa surat lamaran lengkap (Surat Lamaran, Daftar Riwayat Hidup, Fotocopy Ijazah, Transkrip Nilai, Pas Foto Ukuran 4x6 dan Copy KTP yang masih berlaku)

Pelaksanaan test tanggal 18 - 19 Juni 2009 jam 08.30 wib

PT. YTL JAWA TIMUR

REQUIRE A PROFESSIONAL EMPLOYEE

Under Indonesia s private power programme, PT. YTL Jawa Timur
operates and maintains this 2×610 MW Coal-fired Power Station. The
station is located at Paiton, Probolinggo District of East Java, 141 km
Southeast of Surabaya.

We currently have a vacancy for:

PLANNING & SPECIAL TASK ENGINEER
The post holder is responsible to Team Leader of Planning and Special Tasks
in developing and scheduling maintenance planning, including plant
outage or shutdown as well as coordinating other sections within
Engineering Department for the effectiveness of day to day maintenance.
In addition, the Maintenance Planning Engineer will also involve in
various engineering support tasks, such as: scaffolding provision
services, workshop operation and maintenance, tools repair and
calibration and other specials tasks.

Candidate for this position should possess:
1. Minimum Diploma degree (D3) in Industrial, mechanical or electrical engineering from a reputable local University;
2. Having 4 years experience in operation of Coal Fired Power Plant; Exposure in Maintenance Planning will be advantage;
3. Familiar with Computerized Maintenance Management System (Maximo will be advantage);
4. Familiar with coal fired power plant process, permit system and maintenance system (will be advantage);
5. Having ability in scheduling plant outage or shutdown;
6. Having skills in organizing workshop operation (will be advantage);
7. Sound knowledge of scaffolding system, tools calibration and contract (will be advantage);
8. Sound knowledge of maintenance performance indicator;
9. Familiar with Microsoft project and office;
10. Good written and spoken in English.

Remuneration and benefits will be comparable with the best in this industrial sector. Please send a fully detailed CV in English, latest on Friday, 12 June 2009 to:

PT. YTL JAWA TIMUR
Tromol Pos No 36
Paiton - Probolinggo, Jawa Timur 67291

Or recruitment@ytljt.com

Your CV will be kept in strict confidence.

Please include a contact telephone number and recent photograph.

PT. KG Technology

We are a forging company in Balaraja inviting talented professionals to fulfill
the following position:

Marketing

Requirement :
1. University degree
2. Automotive component supply /Automotive Industry experience
2~10 years.
3. Marketing mind with engineering knowledge
4. Casting and forging experience would be plus
5. Speaking English would be plus (but not a must)

If You meet the above requirement, please send your CV to
jsshin@korindo.co.id.

PT. KG Technology
Jl. Raya Serang Km 23-24, Cibadak Cikupa, Tangerang 15710
Tel : 021-5960445 Fax : 021-5960428

1 week after this