30 Desember 2017
22 Desember 2017
21 Desember 2017
29 November 2017
28 November 2017
27 November 2017
16 November 2017
31 Oktober 2017
Tim Palco dari UGM menjadi jawara dalam Mechatronic Day
PERGELARAN Mechatronics Day 3 yang diselenggarakan Swiss German University hari ini (29/10) telah usai. Perlombaan yang berlangsung selama tiga hari berjalan ketat. Perlombaan merakit PLC ini diikuti sejumlah universitas ternama tanah air.
Setelah bersaing dengan ketat, Tim Palco Universitas Gadjah Mada (UGM) akhirnya berhak atas predikat jawara dalam lomba pick and place machine. Tidak dapat dipungkiri lagi kebahagiaan terlihat dari raut wajah Yusuf dan Riati dari tim Palco.
"Kita merasa bahagia. Perjuangan kita selama persiapan mengikuti lomba terbayarkan," tutur Yusuf.
Sang rekan juga tidak kalah memperlihatkan kebahagiannya dan sangat bersyukur, mendapat juara pertama.
"Persiapannya juga mepet tapi alhamdulillah masih bisa juara satu," sambung Riati.
Selain menjadi juara, Yusuf juga senang dapat mengikuti Mechatronics Day 3. Menurutnya ia mendapatkan pengalaman baru.
"Nggak terlalu berharap dapat juara tapi dapat ilmu," tambah Yusuf.
Untuk runner up, jatuh kepada tuan rumah, Swiss German University. Sementara yang menduduki posisi ketiga adalah Universitas Kristen Maranatha.
Mechatronics Day 3 telah diselenggarakan untuk ketiga kalinya. Acara ini merupakan ajang tahunan yang diselenggarakan oleh Swiss German University. Sebelumnya pada 2016, acara ini diadakan dua kali pada tahun tersebut.
Selain tingkat universitas, ajang ini juga menghadirkan perlombaan yang diikuti pelajar SMA dengan memperlombakan merakit PLC untuk Follower Robot. Dua tim dari SMAK 5 Penabur mendapatkan gelar juara pertama dan kedua. Sementara bertengger di posisi tiga ialah MAN 4 Tangerang.
"Tentu senang ya soalnya sudah berjuang keras. Akhirnya berhasil dapat hasil yang terbaik," ujar Timothy perwakilan dari tim SMAK 5X dari SMAK 5 Penabur yang mendapatkan peringkat pertama pada tingkat SMA
Sumber: merahputih.com
Setelah bersaing dengan ketat, Tim Palco Universitas Gadjah Mada (UGM) akhirnya berhak atas predikat jawara dalam lomba pick and place machine. Tidak dapat dipungkiri lagi kebahagiaan terlihat dari raut wajah Yusuf dan Riati dari tim Palco.
 |
| Tim Palco dari UGM menjadi jawara dalam Mechatronic |
Sang rekan juga tidak kalah memperlihatkan kebahagiannya dan sangat bersyukur, mendapat juara pertama.
"Persiapannya juga mepet tapi alhamdulillah masih bisa juara satu," sambung Riati.
Selain menjadi juara, Yusuf juga senang dapat mengikuti Mechatronics Day 3. Menurutnya ia mendapatkan pengalaman baru.
"Nggak terlalu berharap dapat juara tapi dapat ilmu," tambah Yusuf.
Untuk runner up, jatuh kepada tuan rumah, Swiss German University. Sementara yang menduduki posisi ketiga adalah Universitas Kristen Maranatha.
 |
| Yusuf dan Riati Mahasiswa Departemen Teknik Mesin SV-UGM |
Selain tingkat universitas, ajang ini juga menghadirkan perlombaan yang diikuti pelajar SMA dengan memperlombakan merakit PLC untuk Follower Robot. Dua tim dari SMAK 5 Penabur mendapatkan gelar juara pertama dan kedua. Sementara bertengger di posisi tiga ialah MAN 4 Tangerang.
"Tentu senang ya soalnya sudah berjuang keras. Akhirnya berhasil dapat hasil yang terbaik," ujar Timothy perwakilan dari tim SMAK 5X dari SMAK 5 Penabur yang mendapatkan peringkat pertama pada tingkat SMA
Sumber: merahputih.com
30 Oktober 2017
12 Oktober 2017
2 Oktober 2017
26 September 2017
20 September 2017
19 September 2017
10 September 2017
25 Agustus 2017
11 Agustus 2017
2 Agustus 2017
28 Juli 2017
18 Juli 2017
PT EPSON Batam
PT EPSON Batam is the electronics manufacturing company in Batam. with the number of employees more than 3.200 people. Role as production key of SEIKO EPSON Corporation with products: Device. Scanner and Ink Cartridge. Those products are shipped to worldwide customer. In accordance with the vision of the company. PT EPSON BATAM is always working to provide the best products that could meet customer needs with world class management system.
EPSON Batam need the best human resources in a creative. innovative. competitive and ready to join in achieving that goal:
1. MACHINERY ENGINEERING STAFF
Qualifications:
• Male, D3 Electrical/Electronic/Mechanical/Mechatronic
• Good understanding PLC Programming
• Have Ability Desktop Programming (Lab view, visual Basic, etc) and knowledge in Pneumatic is an advantages.
• Fresh Graduated with good GPA are welcome.
2. IK ENGINEERING STAFF
Qualifications:
• Male, D3/S1,Female D3. Industrial/Electrical/Electronic/Mechanical/Mechatronic
• Able to read mechanical drawing & Design. Pro E, Solid
• Work or Auto Cad is an advantage.
• Knowledge about QC tools, SPC, SIX Sigma is an advantage
• Experience in manufacturing is an advantage.
• Fresh Graduated with good GPA are welcome.
3. HUMAN DEVELOPMENT STAFF
Qualifications:
• Female, S1 Any major
• Must have Experience in HR Trainee min 2 years
• Ability to create new training program
• Good in English both oral and written
• Good communication skill
4. PPC STAFF
Qualifications:
• Male/Female. D3/SI Majoring in Engineering/Industrial Information Technology
• Good in English, power point for Microsoft office and SAP is advantage
• Have experience working as PPC Dept.
• Have experience working with data & analysis
5. IT JUNIOR STAFF
Qualifications:
• Male/Female
• D3/S1 Information System
• Familiar with programming software such as VB, Visual studio, SQL is advantages
• Fresh Graduated with good GPA are welcome
6. SPD (SKILL PEOPLE DEVELOPMENT) STAFF
Qualifications:
• Female, D3 Degree in Technical Major
• Familiar with Microsoft Excel, Power point and Word
• Fluent in English both Verbal and Written
• Understand PLC programming and Pneumatic
• Have experience in teaching
• Fresh graduate with good GPA are welcome
GENERAL REQUIREMENT FOR ALL ABOVE POSITION:
Familiar with Microsoft Office and fluent In English both oral and written.
Interest & qualified candidates send your application and comprehensive resumes by post to:
PT EPSON BATAM
Jln. Rambutan Lot 504-508A BIP. Mukakuning, Batam
or by Email to: peb-recruitment@sep.epson.com.sg (Not more than 500 Kb)
(Not more than 500 Kb)
Before: July 31, 2017
Please state the desired position on the envelope or as the email subject
15 Juli 2017
12 Juli 2017
10 Juli 2017
PT. YTL JAWA TIMUR PAITON II POWER STATION
Under Indonesia’s private power programme, PT. YTL Jawa Timur operates and maintains this 2 x 610 MW Coal-fired Power Station. The station is located at Paiton, Probolinggo District of East Java, 141 km Southeast of Surabaya.
We currently have vacancies for:
Electrical Technician – Code: ET
You will be responsible to perform electrical maintenance at Main Power Plant and Auxiliary Plants equipments.
Candidate for Electrical Technician (ET) should possess:
1. Maximum 35 years old;
2. Minimum Diploma 3 years (03) in Electrical Engineering from a reputable University or Polytechnic;
3. Having 3 years relevant experiences in heavy industries or power plant;
4. Good skill in electrical machines (Generators, Motors, Switchgears, Transformers, DC Supply, etc) and its associated interlocking and protection system for all voltage levels (low, high and extra high voltage);
5. Preferably having sound knowledge in PLCs, Electromechanical Systems, Corrosion Control System & Light mechanical repair;
6. Capable and willingness to work under pressure, extended working hours and “call in” scheme;
7. Accurate, reliable and enthusiasm and having good written and spoken English.
Remuneration and benefits will be comparable with the best in this industrial sector.
Please submit a fully detailed CV in English, latest on 14 July 2017 to:
PT. YTL JAWA TIMUR
Tromol Pos No. 36
Paiton – Probolinggo, Jawa Timur 67291
Or
recruitment@ytljt.com
Your CV will be kept in strict confidence
Please include a contact telephone number and recent photograph.
We currently have vacancies for:
Electrical Technician – Code: ET
You will be responsible to perform electrical maintenance at Main Power Plant and Auxiliary Plants equipments.
Candidate for Electrical Technician (ET) should possess:
1. Maximum 35 years old;
2. Minimum Diploma 3 years (03) in Electrical Engineering from a reputable University or Polytechnic;
3. Having 3 years relevant experiences in heavy industries or power plant;
4. Good skill in electrical machines (Generators, Motors, Switchgears, Transformers, DC Supply, etc) and its associated interlocking and protection system for all voltage levels (low, high and extra high voltage);
5. Preferably having sound knowledge in PLCs, Electromechanical Systems, Corrosion Control System & Light mechanical repair;
6. Capable and willingness to work under pressure, extended working hours and “call in” scheme;
7. Accurate, reliable and enthusiasm and having good written and spoken English.
Remuneration and benefits will be comparable with the best in this industrial sector.
Please submit a fully detailed CV in English, latest on 14 July 2017 to:
PT. YTL JAWA TIMUR
Tromol Pos No. 36
Paiton – Probolinggo, Jawa Timur 67291
Or
recruitment@ytljt.com
Your CV will be kept in strict confidence
Please include a contact telephone number and recent photograph.
4 Juli 2017
16 Juni 2017
14 Juni 2017
7 Juni 2017
6 Juni 2017
Langganan:
Postingan (Atom)